When you're looking to get the most bang for your buck for your hot rod Dodge pick up, look to our Shop Specials page first. From great prices on overstock parts to special savings on exclusive performance parts and power kits, this might be your best place to go fast on the cheap.
WOW 40 RWHP FOR $999.99
Dual plane intake packaged with custom written sct file. We saw 40 horsepower gain @ 5000 rpm over stock. This intake is the best choice for most 318 /360 N/A street / strip trucks. Look at the power graph. The max power is not very different from one intake to the next but look at the power lost by the bigger single plane intakes at 3500rpm. The airgap is up by 30 hp over the single plane intakes yet performs the same at 5500rpm. The power numbers do not lie. At $999.99 this is a great value for the money and an excellent starting point.
OIL PAN WITH 5/8" MEGA PICKUP $349.99
Are you looking for a new pan with a lot of benefits, well we have you covered. We now offer a deep sump 6qt oil pan in rust free iridite finish with our exclusive 5/8 oil pickup and driver side mounted screw in dipstick eliminating the old 2 mile dip stick. The oil pan is often overlooked however it holds the life blood for your engine. The weakest point in the oiling system on a small block mopar is the oil pickup. It's inside diameter is only 7/16" of an inch where ours is 5/8" of an inch. Our pickup can virtually swallow the factory style. We also did a pressure and volume test with ours over stock and saw a 20% increase in oil volume and a 12 psi pressure increase. We also did a test where we installed a high volume inplace of a stock pump both used the stock pickup. We found that the high volume flowed the same as the stock due to not being able to pull enough oil.
FABRICATED VALVE COVERS $279.99
Tired of the old school looking mopar performance cast valve covers, but not able to afford the high end look of a set of fabricated valve covers well look no further. You can now have the high end look without the high end price of a fabricated valve cover. These covers are offered in an anodized black or polished aluminum. They also feature two reusable press in style breather elements.
BOOSTED ELECTRONIC PACKAGE $999.99 with 39# injectors
$1099.99 with 60# injectors
Our boosted electronics package is designed as a full tuning system for the obd-2 dodge trucks. It gives us a means of tuning a boosted setup be it turbo or supercharged. The kit features an sct tuner with custom startup file installed, 2bar map with wire harness, and a set of injectors to match the power output of the system being installed.
408 N/A ROTATING ASSEMBLY $1999.99
Want more cubes out of your 360 based small block. Check out our budget rotating assembly. It features a 4.00" cast crank, Keith Black Hyper pistons, production 6.123 rods with arp hardware, and premium rings and bearings. The compression ratio on this kit is 10.0:1.
